How do you reset an Antminer?

Contents show

After powering on the miner for 2 minutes, please press “Reset” button for 5 seconds, then release it. The miner will be restored factory settings within 4 minutes and automatically restart (no need to power off the miner).

How do I factory reset my Antminer l3?

On the controller front panel, press and hold the Reset button for 10 seconds. Resetting your miner will reboot it and restore its default settings. The red LED will automatically flash once every 15 seconds if the reset is operated successfully.

How do I reset my a1 miner?

Press and hold Reset button more than 3 seconds to restore the default settings of the miner.

How do I reset my S17?

Restore with hard reset or Recovery mode itel S17

  1. 1- First turn off your itel S17 completely. …
  2. 2- Keep holding on volume down and power keys together for a few seconds in your itel S17. …
  3. 3- When the itel logo is displayed, release the buttons.

How do you reset an Antminer d3?

On the controller front panel, press and hold the Reset button for 10 seconds. Resetting your miner will reboot it and restore its default settings. The red LED will automatically flash once every 15 seconds if the reset is operated successfully.

IT IS IMPORTANT:  Is share capital an equity?

What is Antminer username and password?

The default account is: username ‘root’, password ‘root’.

How do I use IP Reporter Antminer?

Follow these steps:

  1. Extract the file to a convenient location on your computer.
  2. Right‐click IPReporter.exe and run it as Administrator. …
  3. Select either of the following options: …
  4. Click “Start”.
  5. On the miner control board, press and hold the IP Report button for five seconds, until it beeps.

How do I join Poolin?

（https://poolin.fi/）。
…

  1. Log in to the Poolin website at www.poolin.com and sign up an account using either mobile or email(You will receive a registration verification code within 60 seconds).
  2. Log in to your Poolin Mining Pool account.

How do I set up S9j?

How to set up a new S9i/S9j

  1. It is recommend to use a power supply offering 20% more than the miner’s power requirement.
  2. PoE is not supported.
  3. Only Ethernet network connection supported.
  4. Use the miner in an environment between 10 to 35 degree Celsius.
  5. Keep the miner’s surrounding humidity below 65%

How do I set up my AntMiner?

Open your browser and enter the IP address of the Antminer device to access the Web interface. After a successful login, you will be sent to the Antminer Dashboard. Change the IP address configuration to static. Enter the desired IP address configuration.

What AntMiner can mine Dogecoin?

The top ASIC miners for Dogecoin mining are currently: Bitmain Antminer L3.